Quotessence
Home / Authors / Christopher Dunn

Christopher Dunn Quotes

Author

Filter quotes by topic

AllEngineeringPyramidsMegalithic MonumentsDeep Human HistoryAncient CivilizationsArchaeologyEgyptologyHistoryMasonryEnergyMachiningAncient Advanced TechnologyKnowledgeLost Ancient CivilizationsMysteryVibrationAncient ArtifactsArtifactsEngineersFree Energy

Famous Christopher Dunn Quotes

“Egyptologists claim that Khufu began construction of his pyramid so it would be completed in time to accept his corpse. I should imagine that while he was considering what style of pyramid he wanted, he would have been consulting his architects and engineers to see what was feasible. He also might have been interested in knowing how long it would take to build and how much it would cost. Using today's technology, modern stonecutters have estimated that it would take at least twenty-seven years just to quarry and deliver the stone. I wonder how long it would have taken Khufu's men using simple, primitive methods?”

HistoryPyramidsArchaeologyDeep Human HistoryAncient CivilizationsMegalithic Monuments
Book:The Giza Power Plant: Technologies of Ancient Egypt
Create image

“There are, however, explicit engineering qualities associated with the pyramids that do not support the theory that it was a temple, a tomb, or a mausoleum. The redundancy of masonry in these structures is only one good argument against the tomb theory. More persuasive is the fact that Egyptologists woefully lack the material evidence to support it—there are no bodies! It is a widely held popular belief that Egyptian pyramids contained mummies, and that these mummies were actually discovered inside the pyramids. This is simply not true. These beliefs are only inferences that are reinforced by inaccurate documentaries that link the pyramids closely with the Valley of the Kings, where there are no pyramids, but where the mummies actually were found. In reality, the Giza Plateau and the Valley of the Kings are two vastly different sites, separated by hundreds of miles of desert. It is now becoming widely recognized by people who research the pyramid issue that of all the pyramids excavated in Egypt, there was not one that contained an original burial. Considering that more than eighty pyramids have been discovered in Egypt, this fact alone practically negates the tomb theory.”

HistoryPyramidsMasonryDeep Human HistoryAncient CivilizationsMegalithic Monuments
Book:The Giza Power Plant: Technologies of Ancient Egypt
Create image

“Current theories regarding the function and construction of the pyramid fall short. A credible theory would have to explain the following conditions found inside the Great Pyramid: -The selection of granite as the building material for the King's Chamber. It is evident that in choosing granite, the builders took upon themselves an extremely difficult task. -The presence of four superfluous chambers above the King's Chamber. -The characteristics of the giant granite monoliths that were used to separate these so-called "construction chambers." -The presence of exuviae, or the cast-off shells of insects, that coated the chamber above the King's Chamber, turning those who entered black. -The violent disturbance in the King's Chamber that expanded its walls and cracked the beams in its ceiling but left the rest of the Great Pyramid seemingly undisturbed. -The fact that the guardians were able to detect the disturbance inside the King's Chamber, when there was little or no exterior evidence of it. -The reason the guardians thought it necessary to smear the cracks in the ceiling of the King's Chamber with cement. -The fact that two shafts connect the King's Chamber to the outside. -The design logic for these two shafts—their function, dimensions, features, and so forth.”

MysteryEngineeringPyramidsDeep Human HistoryAncient CivilizationsEgyptology
Book:The Giza Power Plant: Technologies of Ancient Egypt
Create image

“if we were to build a Great Pyramid today, we would need a lot of patience. In preparation for his book "5/5/2000 Ice: The Ultimate Disaster", Richard Noone asked Merle Booker, technical director of the Indiana Limestone Institute of America, to prepare a time study of what it would take to quarry, fabricate, and ship enough limestone to duplicate the Great Pyramid. Using the most modern quarrying equipment available for cutting, lifting, and transporting the stone, Booker estimated that the present-day Indiana limestone industry would need to triple its output, and it would take the entire industry, which as I have said includes thirty-three quarries, twenty-seven years to fill the order for 131,467,940 cubic feet of stone. These estimates were based on the assumption that production would proceed without problems. Then we would be faced with the task of putting the limestone blocks in place. The level of accuracy in the base of the Great Pyramid is astounding, and is not demanded, or even expected, by building codes today. Civil engineer Roland Dove, of Roland P. Dove & Associates, explained that .02 inch per foot variance was acceptable in modern building foundations. When I informed him of the minute variation in the foundation of the Great Pyramid, he expressed disbelief and agreed with me that in this particular phase of construction, the builders of the pyramid exhibited a state of the art that would be considered advanced by modern standards.”

HistoryEngineeringPyramidsMasonryDeep Human HistoryAncient CivilizationsMegalithic Monuments
Book:The Giza Power Plant: Technologies of Ancient Egypt
Create image

“The quantity of stone that had to be quarried, hauled, and hoisted into place in the Great Pyramid becomes even more impressive when it is compared with other civil engineering feats, whether real or imagined. It has been stated that it contains more stone than that used in all the churches, cathedrals, and chapels built in England since the time of Christ. Thirty Empire State Buildings could be built with the estimated 2,300,000 stones. A wall three-feet high and one-foot thick could be built across the United States and back using the amount of masonry contained in the Great Pyramid.”

EngineeringPyramidsMasonryDeep Human HistoryAncient CivilizationsMegalithic Monuments
Book:The Giza Power Plant: Technologies of Ancient Egypt
Create image

“The most compelling evidence for the likelihood that the Great Pyramid was constructed by craftspeople with specialized knowledge and advanced techniques is the precision with which it was built. This precision reveals more about the true nature of its builders than any inscription or cartouche. There is no way to ignore the accuracy of this stonecutting, despite Egyptologists' interpretations of the inscriptions found in pyramids or temples in Egypt. After all, hieroglyphics, like any language, has the potential to be misunderstood. After discussing much of the preceding information with the artisans at today's building sites, machine shops, and quarry mills, I became aware of the reason why we are still influenced by ideas that are not compatible with practical application. The artisans of today are too busy making a living to give serious thought to scholarly theories, and even when gross inequities are presented to them, they respond with a cynical shrug. When told that giant limestone casing stones, which were cut to within 1/100 of an inch, were cut with hammer and chisel, a typical response was a shake of the head.”

Deep Human HistoryMonumentsMegalithic MonumentsAncient CivilizationEgyptology
Book:The Giza Power Plant: Technologies of Ancient Egypt
Create image

“With such a convincing collection of artifacts that prove the existence of precision machinery in ancient Egypt, the idea that the Great Pyramid was built by an advanced civilization that inhabited the Earth thousands of years ago becomes more admissible. I am not proposing that this civilization was more advanced technologically than ours on all levels, but it does appear that as far as masonry work and construction are concerned they were exceeding current capabilities and specifications.”

EngineeringPyramidsPrecisionMasonryDeep Human HistoryMachiningLost Ancient Civilizations
Book:The Giza Power Plant: Technologies of Ancient Egypt
Create image

“In 1983 Donald Rahn of Rahn Granite Surface Plate Co. told me that diamond drills, rotating at nine hundred revolutions per minute, penetrate granite at the rate of one inch in five minutes. In 1996, Eric Leither of Tru-Stone Corp. told me that these parameters have not changed since then. The feedrate of modern drills, therefore, calculates to be .0002 inch per revolution, indicating that the ancient Egyptians drilled into granite with a feedrate that was five hundred times greater or deeper per revolution of the drill than modern drills! The other characteristics of the artifacts also pose a problem for modern drills. Somehow the Egyptians made a tapered hole with a spiral groove that was cut deeper through the harder constituent of the granite. If conventional machining methods cannot answer just one of these questions, how do we answer all three?”

EngineeringPyramidsDeep Human HistoryMegalithic MonumentsMachiningLost Human Civilizations
Book:The Giza Power Plant: Technologies of Ancient Egypt
Create image

“Ultrasonic drilling fully explains how the holes and cores found in the Valley Temple at Giza could have been cut, and it is capable of creating all the details that Petrie and I puzzled over. Unfortunately for Petrie, ultrasonic drilling was unknown at the time he made his studies, so it is not surprising that he could not find satisfactory answers to his queries. In my opinion, the application of ultrasonic machining is the only method that completely satisfies logic, from a technical viewpoint, and explains all noted phenomena. [...] The most significant detail of the drilled holes and cores studied by Petrie was that the groove was cut deeper through the quartz than through the feldspar. Quartz crystals are employed in the production of ultrasonic sound and, conversely, are responsive to the influence of vibration in the ultrasonic ranges and can be induced to vibrate at high frequency. When machining granite using ultrasonics, the harder material (quartz) would not necessarily offer more resistance, as it would during conventional machining practices. An ultrasonically vibrating tool bit would find numerous sympathetic partners, while cutting through granite, embedded right in the granite itself. Instead of resisting the cutting action, the quartz would be induced to respond and vibrate in sympathy with the high-frequency waves and amplify the abrasive action as the tool cut through it.”

EngineeringArchaeologyDeep Human HistoryMegalithic MonumentsMachiningLost Ancient Civilizations
Book:The Giza Power Plant: Technologies of Ancient Egypt
Create image

“No machines have been found in the archaeological record to support these assertions, but there is an abundance of circumstantial evidence that leads to such conclusions. Are the machines still intact and lying under the desert sand? Or were they removed completely from the areas? Or could it be that all this evidence points to an earlier civilization that suffered a cataclysm of such magnitude that much of what existed was destroyed, and what remained was susceptible to erosion, decay, and corrosion, and slowly disappeared over a long period of time? This brings us back to Robert Schoch's evaluation of the erosion pattern on the Sphinx and the Sphinx enclosure. He claimed that the period of time when sufficient rain fell in Egypt to cause this erosion was seven to nine thousand years ago. Is this sufficient time for ancient machines to turn to dust and blow away? It seems incredible to imagine, but there is reason to suspect that this could have happened. [...] If we follow the idea of an older civilization, therefore, the pyramids would have already been there before the first dynasty of the ancient Egyptians. The Great Pyramid was, most likely, the zenith of construction on the plateau, and the other pyramids were likely built before it was. Yet something happened to the culture that built the pyramids, and when Khufu came on the scene, he naturally chose the most impressive structure--the Great Pyramid--as his own, and his heirs took turns in claiming the rest. What event could have brought death and destruction to this ancient civilization that is referred to in Egyptian lore as being inhabited by gods of the First Time?”

MachinesPyramidsArchaeologyErosionDeep Human HistoryCataclysmMegalithic MonumentsMegalithic Structures
Book:Lost Technologies of Ancient Egypt: Advanced Engineering in the Temples of the Pharaohs
Create image

“The precision in these artifacts is irrefutable. Even if we ignore the question of how they were produced, we are still faced with the question of why such precision was needed. Revelation of new data invariably raises new questions. In this case it is understandable for skeptics to ask, "Where are the machines?" But machines are tools, and the question should be applied universally and can be asked of anyone who believes other methods may have been used. The truth is that no tools have been found to explain any theory on how the pyramids were built or the granite boxes were cut. More than eighty pyramids have been discovered in Egypt, and the tools that built them have never been found. Even if we accepted the notion that copper tools are capable of producing these incredible artifacts, the few copper implements that have been uncovered do not represent the number of such tools that would have been used if every stonemason who is supposed to have worked on the pyramids at just the Giza site owned one or two. In the Great Pyramid alone there are an estimated 2,300,000 blocks of stone, both limestone and granite, weighing between two-and-one-half tons and seventy tons each. That is a mountain of evidence, and there are no tools surviving to explain even this one pyramid's creation.”

EngineeringPyramidsPrecisionDeep Human HistoryMachiningLost Ancient Civilizations
Book:The Giza Power Plant: Technologies of Ancient Egypt
Create image