Quotessence
Home / Topics / Engineering Quotes

Engineering Quotes

Browse 736 quotes about Engineering.

Related topics

Engineering Quotes

“Rudolph Gantenbrink's important discovery [of a door with metallic handles found with a robot inside a shaft in the Great Pyramid] has forced many Egyptologists to finally accept that their theories are flawed. This is an interesting development. Academic mores normally dictate that when a theory contains flaws, or unsubstantiated data that supports critical elements on which the theory is built, the entire theory must either be thrown out or revised. Instead of the tomb theory being dismissed, however, Gantenbrink himself was dismissed from the project. He discovered the "door" on March 22, 1993. A week later, he was told to pack up his robot and leave Egypt. Gantenbrink has the technology to go beyond the so-called door but, presumably because of political reasons, has been refused permission to resume his research in Egypt. Gantenbrink, with an engineer's typical pragmatism, stated, 'I take an absolute neutral position. It is a scientific process, and there is no need whatsoever to answer questions with speculation when these questions could be answered much more easily by continuing the research. Yet because of a stupid feud between what I call believers and non-believers, I am condemned as someone who is speculating. But I am not. I am just stating the facts. We have a device [ultrasonic] that would discover if there is a cavity behind the slab. It is nonsensical to make theories when we have the tools to discover the facts.”

“Current theories regarding the function and construction of the pyramid fall short. A credible theory would have to explain the following conditions found inside the Great Pyramid: -The selection of granite as the building material for the King's Chamber. It is evident that in choosing granite, the builders took upon themselves an extremely difficult task. -The presence of four superfluous chambers above the King's Chamber. -The characteristics of the giant granite monoliths that were used to separate these so-called "construction chambers." -The presence of exuviae, or the cast-off shells of insects, that coated the chamber above the King's Chamber, turning those who entered black. -The violent disturbance in the King's Chamber that expanded its walls and cracked the beams in its ceiling but left the rest of the Great Pyramid seemingly undisturbed. -The fact that the guardians were able to detect the disturbance inside the King's Chamber, when there was little or no exterior evidence of it. -The reason the guardians thought it necessary to smear the cracks in the ceiling of the King's Chamber with cement. -The fact that two shafts connect the King's Chamber to the outside. -The design logic for these two shafts—their function, dimensions, features, and so forth.”

“I looked more closely at what I considered to be the most significant information regarding the Great Pyramid, which was the accuracy with which it was built. It soon became obvious to me that the researchers on both sides of the issue were sympathetic to the craftspeople involved in building the pyramids. But the researchers were not craftspeople themselves, and they did not have the perspective gained through years of experience working with their hands and with machinery. Having that experience myself, I have some very strong opinions regarding the level of manufacturing expertise practiced by the ancient Egyptians. They were not primitive by any means, and their craftsmanship and precision would be an extreme challenge to duplicate today.”

“if we were to build a Great Pyramid today, we would need a lot of patience. In preparation for his book "5/5/2000 Ice: The Ultimate Disaster", Richard Noone asked Merle Booker, technical director of the Indiana Limestone Institute of America, to prepare a time study of what it would take to quarry, fabricate, and ship enough limestone to duplicate the Great Pyramid. Using the most modern quarrying equipment available for cutting, lifting, and transporting the stone, Booker estimated that the present-day Indiana limestone industry would need to triple its output, and it would take the entire industry, which as I have said includes thirty-three quarries, twenty-seven years to fill the order for 131,467,940 cubic feet of stone. These estimates were based on the assumption that production would proceed without problems. Then we would be faced with the task of putting the limestone blocks in place. The level of accuracy in the base of the Great Pyramid is astounding, and is not demanded, or even expected, by building codes today. Civil engineer Roland Dove, of Roland P. Dove & Associates, explained that .02 inch per foot variance was acceptable in modern building foundations. When I informed him of the minute variation in the foundation of the Great Pyramid, he expressed disbelief and agreed with me that in this particular phase of construction, the builders of the pyramid exhibited a state of the art that would be considered advanced by modern standards.”

“The quantity of stone that had to be quarried, hauled, and hoisted into place in the Great Pyramid becomes even more impressive when it is compared with other civil engineering feats, whether real or imagined. It has been stated that it contains more stone than that used in all the churches, cathedrals, and chapels built in England since the time of Christ. Thirty Empire State Buildings could be built with the estimated 2,300,000 stones. A wall three-feet high and one-foot thick could be built across the United States and back using the amount of masonry contained in the Great Pyramid.”

“It now remains for those who are absolutely convinced that the ancient Egyptians constructed the pyramids using primitive techniques to build a pyramid themselves, using those same techniques that they propose the Egyptians used. As part of such an attempt, it would help if they cut out just one seventy-ton block of granite from the Aswan quarry, which is located five hundred miles away, using their hardened copper chisels or dolerite balls and then transported the block to the Giza Plateau with their barges, ropes, and manpower. If the proponents of traditional theories of constructing the pyramids are able to accomplish this feat, then we should give serious consideration to their proposals about pyramid construction.”

“Here is the product of an ancient civilization empowered with the knowledge that as long as the moon continued to orbit the Earth, the special relationship that existed between the two assured the Egyptians of vast amounts of energy. The source of the energy is the Earth itself, in the form of seismic energy. The ancient Egyptians saw tremendous value in this form of energy and expended a considerable amount of effort to tap into it. The benefits they received may have been twofold: energy to fuel their civilization, and the ability to stabilize the Earth's crust by drawing off seismic energy over a period of time rather than allowing it to build up to destructive levels.”

“E per tutto il giorno mi riempivano la testa di stronzate che volevano farmi tenere a mente, come ad esempio le equazioni per calcolare la distanza fra il posto dove ci trovavamo e quelle in cui volevano farci andare loro, e naturalmente quelle per tornare indietro; cazzate come le coordinate coassiali, il calcolo dei coseni, la trigonometria sferoide, l'algebra di Boolean, gli antilogaritmi, l'analisi di Fourier, quadrati e matrici. Mi dissero che io avrei dovuto fare da riserva al computer di riserva.”

“There are hundreds of miracles within a single machine. Americans calmly explain these with mathematical formulas. Our difficulty is to learn, theirs to appreciate. We Latins, even the most intelligent of us, still count on our fingers and toes. But once we do learn, we shall surpass the Americano, because we understand the spiritual significance of a machine. We see the beauty of combining gas, grease and steel into a powerful, exact movement. We appreciate the material destiny of the universe.”

“Because of the tendency of engineers to focus more on engineering matters rather than on archaeology, history, or anthropology, they are often accused of stripping artifacts of their cultural context and cherrypicking the evidence. Yet as an engineer, I strongly argue that the engineering context is, in fact, a cultural context in and of itself--one that is less susceptible to ambiguity than the cultural context of mummies and potsherds, which can be added decades or even centuries after a building has been completed.”

“Programmers are isolated. They sit in their cubicle; they don't think about the larger picture. To my mind, a programmer is not an engineer, because an engineer is somebody who starts with a social problem that an organization or a society has and says, "OK, here's this problem that we have- how can we solve it?" The engineer comes up with a clever, cost-effective solution to address that problem, builds it, tests it to make sure it solves the problem. That's engineering.”

“Steiger presented another analysis by a professional engineer, who saw the wall carvings at Dendera as an accurate illustration of an electrical device—one which would not be out of place in a modern electrical blueprint file. "In regards to the ancient Egyptian electron tubes, electromagnetic engineer Professor S.R. Harris identified a box-and braided cable in the picture as 'virtually an exact copy of engineering illustration used today for representing a bundle of conducting wires.' The cable runs from the box the full length of the floor and terminates at both the ends and at the bases of two peculiar objects resting on two pillars. Professor Harris is said to have identified these representations as high voltage insulators.”

“I am a scientist, but don't make the mistake of thinking of me as yet another shaky scientist. Before I was a scientist, I was a monk - before I was a monk, I was an engineering student – and even before that I was a martial artist. So be very careful, for there's nothing more dangerous than a wounded scientist. Science is literally the only super power in the world. And I’ve been playing with science, before I could speak english. When my teenage peers were obsessing over getting high, I was obsessed with building circuits. I gave it all up, because society has plenty innovators, but zero reformer scientist.”

“In the one hundred thirty years since Petrie published his seminal studies of the pyramids and temples of Egypt, the hand tools and building and sculpting tools used by men and women have improved exponentially in capability and efficiency and hard drives are better known as integral devices in a computer. Yet we are taught that during the three thousand years that the ancient Egyptians flourished on this planet, the tools used by men and women did not change. How could this be? The finely crafted and precise boxes inside the pyramids at Giza were supposedly created in the fourth dinasty, 2500 BCE, or forty-five hundred years ago. The finely crafted and precise boxes inside the rock tunnels of the Serapeum were supposedly created in the eighteenth dynasty, 1550-1200 BCE, or thirty-five hundred years ago. We are asked to believe that in a one-thousand-year span, the ancient Egyptians did not make any significant improvement in their tools and methods for cutting hard igneous rock. We, however, have examined the results of their labor, and it is clear that the Egyptians were not stupid people. In fact, they were geniuses in their accomplishments, yet we are to accept that while they tapped into the awesome power of the human spirit and creativity, they did not ask, over the course of a full millennium, how they could do their job better--how they could demand less pain and strain from their workforce, how they could do more with less effort, how they could reduce injuries and provide workers with more time off. If there is any mystery to ancient Egypt, it is why a paradigm that was established one hundred thirty years ago still holds force among many Egyptologists and archaeologists.”

“As we look around the world, especially in Egypt, Lebanon, Turkey, the west coast of Italy, Peru, and Bolivia, there are stone structures and the remains of others which don't easily fit into the standard picture of history. The pyramids of Giza in Egypt, Puma Punku in Bolivia, and the great megalithic wall of Sachsayhuaman in Peru are but three examples of astonishingly well-made stone works which modern engineers, stone masons, and other experts puzzle over. Conventional academics in general date these structures well within the standard timeline of so-called civilization. The generally prescribed creation date of the three pyramids of Giza is about 2500 BC, Puma Punku is alleged to have been constructed around 600 AD, and Sachsayhuaman approximately 1200 to 1400 AD. However, what intrigues engineers, architects, stone masons, and other professionals is the extreme precision of the work, often in very hard stone, which many archaeologists insist was usually achieved using bronze and or copper chisels, wooden measuring devices, and stone hammers.”

“One also finds, even to this day, some amazing works such as the aforementioned Sachsayhuaman and the Coricancha in Cusco, where no mortar of any kind was used. It was stone-on-stone, with astonishing accuracy of fit. In the Inca toolkit, as found in the archaeological record, only copper and bronze chisels have been found, along with wooden measuring instruments and stone pounders or hammers. Conventional archaeologists contend that such tools were responsible for the refined workmanship seen in Cusco and other 'Inca' areas. However, the stone used - granite, andesite, and basalt - are harder than the majority of the tools used, and thus could not have been responsible for the work. The same is true of Tiwanaku and the connected site of Puma Punku. Massive megalithic blocks with sculpted surfaces are found at these locations, made of local sandstone, which would be difficult to shape with bronze chisels and stone hammers. However, the real enigmas are the even harder andesite and basalt stones, cut and shaped with such precision that modern engineers, stone masons, and other professionals question how such work could have been achieved without at least 20th century technology.”

“With such a convincing collection of artifacts that prove the existence of precision machinery in ancient Egypt, the idea that the Great Pyramid was built by an advanced civilization that inhabited the Earth thousands of years ago becomes more admissible. I am not proposing that this civilization was more advanced technologically than ours on all levels, but it does appear that as far as masonry work and construction are concerned they were exceeding current capabilities and specifications.”

“What we have been taught is that the ancient Egyptians were in posession of only simple hand tools, and that the only metals available to the Egyptians of the fourth dynasty, when the Giza Pyramids were built, were copper, gold, and silver. What is inferred, therefore, is that absent the tools made from these materials, the simple abrasive experiments actually demonstrate the stone-working methods of ancient Egypt. We are told that the ancient Egyptians had not yet developed the knowledge to extract the raw materials necessary to produce iron and steel. It has been suggested that they may have used meteoric iron, because they found it lying on the ground, but they did not mine the ore and smelt it in a foundry. Support for this view is the lack of evidence that they used tools made of any material other than copper, stone, and wood. Yet absence of evidence is not evidence of absence. Although sophisticated tools made of iron or steel may not yet have been discovered in the archaeological record, what has been found is not adequate enough to explain how the artifacts were created.”